碳钢管道焊接施工方案（中英文

内容简介 工程主要工程量包括动力、照明配电箱各一只，动力电缆815米，照明电缆6545米，电缆桥架1238米，配线槽220米，灯具204套，接地极24根，接地干线1500米，接地线1200米，防爆断路器4只。 本方案为某低温罐区电气安装工程提供作业指导。只适用于某低温罐区配套电气安装工程的安装、检查，参与安装的施工人员应遵照执行。

内容简介 1、镀锌钢管明敷设 Open Lay of Galvanized Steel Pipe 本工程明敷设钢管均采用了镀锌钢管明敷设工艺。 All open-lay steel pipes in the project adopt the open-lay technology of galvanized steel pipe. （1）工艺流程 Technological process： （2）可上人的吊顶内以及不封闭式竖井通道内的配管为明配管，其管路走向及支架固定均应按明配管要求施工。 The distributing pipe in suspended ceilings that can be entered into and shaft passages that are not closed is open. Both its pipeline direction and support fixture should construct according to requirements of open distributing pipes. （3）按设计要求用冷煨法把管子煨出所需的弯度，20mm以下管径的管子用手板煨管器，25mm以上管径用液压煨管器（或专用煨管器），煨弯处凹扁度应符合规范规定。 Use the simmering method to simmer pipes with a necessary bend according to design requirements. Pipes that the pipe diameter is less than 20mm may adopt a palm simmer pipe machine. Pipes that the pipe diameter is more than 25mm may use a hydraulic simmer pipe machine (or special simmer pipe machine). The concavity at simmering bends should accord with specifications and regulations.

楼地面设计做法:设计主要有防滑地砖楼地面、耐磨砼楼面。外墙设计装饰做法:外墙涂料、水泥砂浆打底粉光。

本工程地处上海某化工园区内,由上海某石化有限公司投资兴建的上海乙烯裂解装置工程。 This project is located in Shanghai Caojing Chemical Industrial Zone, invested and constructed by Shanghai SECCO Petrochemicals Co., Ltd. 工程名称:上海乙烯裂解装置工程 Name of Project: Shanghai Ethylene Cracker Complex Project 工程地点: 上海某化工园区内 Location: Shanghai Caojing Chemical Industrial Zone 建设单位: 上海某石化有限公司 Owner: Shanghai SECCO Petrochemicals Co., Ltd. 设计单位:ABB卢玛司全球设计事务所 Design Institute: ABB Luma Global Co. 地质勘察单位:某工程公司勘察设计院

项目名称： TDI联合装置厂区中压电缆敷设施工。Project name: TDI Train Plant Medium Voltage Cable Pulling Work. 本工程涉及三个变电站，分别是现有的220/35kV A472变电站、现有的35/10kV B301S变电站以及新建的35/10kV C581变电站，工作内容为三个变电站之间和从三个变电站接至MV用户的电力电缆、控制电缆、接地电缆的敷设。The project involves three substations, namely the existing 220/35kV A472 substation, the existing 35/10kV B301S the 35/10kV C581 substation and a new substation. This is the power, control and grounding cable pulling among three substations and for MV users connected to the three substations.

本次照明施工主要分为装置区照明和道路照明两部分，装置区照明灯具类型、回路比较多施工时必须严格按照照明平面图和照明系统图进行施工，照明配管采用镀锌钢管全封闭形式。道路照明路灯基础部分由其他单位施工，目前全场地下工程尚未完全结束施工时必须注意其它专业的相互配合。The overall outdoor lifting is planned to be started from the middle of October and completed by the middle of December. The lightings are mainly for the plant area and the roads. The lamps in the plant area have more loops so that the construction must be strictly in accordance with the lighting plans and system drawings and the lighting piping shall use galvanized steel pipes with complete closure. The street lamp foundation shall be constructed by another unit. At present, because the overall underground project hasn’t been finished, the construction unit must pay attention to cooperate with other disciplines.

造型景墙施工大样图（中英文）：平面图 立面图 剖面图 中英文标注

本合同由如上列明的甲、乙双方按照《中华人民共和国合同法》、《建筑安装工程承包合同条例》以及国家相关法律法规的规定，结合本合同具体情况，于xx年x月x日在xx签订。 This contract is signed by the two Parties in xxxx on xxxx according to the “Contract Law of the People’s Republic of China”, the “Regulation on Building and Installation Contracting Contract”, and other relevant national laws and regulations, as well as the specific nature of this project

根据《中华人民共和国合同法》以及其他有关法律法规规定的原则，结合本工程的具体情况，甲、乙双方在平等、自愿、协商一致的基础上达成如下协议，共同遵守。 According to “P.R.C Contract Law”, and other relevant laws and regulations to the specific circumstances of this project, parties A and B have hereby equally and voluntarily entered into the following agreement executed on the basis of mutual respect.

?工程名称：***风电临港500MW 叶片和机舱项目 Project Name: *** Lingang 500MW Blade and Nacelle Project ?建设单位：风力发电叶片***（上海）有限公司 Building Company: *** WIND POWER BLADE (SHANGHAI) Co. LTD. ?设计单位： Design Company: 管理顾问： Administrative Consultant: ?建设地点：上海****新城**园区**路以西、**路以南地块。 Construction site: site locates west to **Road and south to**Road, both roads are within *** Zone of ****， ***District, Shanghai. ?工程规模：Project Scale 项目占地总面积为34771.04m2，该工程总建筑面积约为40770.05m2本工程项目由1#、2#生产厂房、卫门喷漆间、垃圾间及自行车棚，室外道路及绿化工程等。 The project has an area of 34771.04m2 in total and a building area of 40770.05m2. The project comprises the constructions of 1# and 2# production buildings, guardhouses, spraying shop, garbage house and bicycle shed, as well as outdoor roads and greening engineering.

罗列了一些主要的专业术语的中英文，以方便后续查找国外文献。

是一套国际报价方式的公装预算模板共分为：费用汇总表、措施费用清单、装饰项目清单、电气项目清单、给排水项目清单、暖通项目清单、消防改造项目清单、其他项目清单、零星项目清单、综合单价分析表、技术一览表。更含很多批注说明，让您轻松完成报价任务。很乐意与各位同行分享。

外国钢结构厂房设计，带有5T吊车，节点非常详细，值得下载，欢迎提意见

铁艺栏杆做法大样图（中英文）：平面图 立面图 中英文标注

中英文对照建筑和结构总说明，通用说明.适合于国外建筑和结构设计的图纸完整性，方便使用。

内容简介 本工程涉及三个变电站，分别是现有的220/35kV A472变电站、现有的35/10kV B301S变电站以及新建的35/10kV C581变电站，工作内容为三个变电站之间和从三个变电站接至MV用户的电力电缆、控制电缆、接地电缆敷设所需电缆沟的开挖工程。The project involves three substations, namely the existing 220/35kV A472 substation, the existing 35/10kV B301S the 35/10kV C581 substation and a new substation. This is the power, control and grounding cable trench excavation project among three substations and for MV users connected to the three substations.

一路引至B301S建筑（35/10kV变电站）原1#主变，原1#主变电缆将抽出，与新增4#主变连接；另两路引至35/10kV C581变电站1#主变和2#主变。回路采用FS-YJY-26/35kV-1*300mm2单芯电缆，直埋敷设。去C581的两路35kV线路，敷设时沿不同路径，以避免两回线路同时受损

项目名称： 本工程涉及三个变电站，分别是现有的220/35kV A472变电站、现有的35/10kV B301S变电站以及新建的35/10kV C581变电站，工作内容为三个变电站之间和从三个变电站接至MV用户的电力电缆、控制电缆、接地电缆敷设所需电缆沟的开挖工程。The project involves three substations, namely the existing 220/35kV A472 substation, the existing 35/10kV B301S the 35/10kV C581 substation and a new substation. This is the power, control and grounding cable trench excavation project among three substations and for MV users connected to the three substations.

特色造型景墙施工大样图：平面图 立面图 侧立面图 剖面图 大样图 中英文标注

本合同由如上列明的甲、乙双方按照《中华人民共和国合同法》、《建筑安装工程承包合同条例》以及国家相关法律法规的规定，结合本合同具体情况，于xx年x月x日在xx签订。 This contract is signed by the two Parties in xxxx on xxxx according to the “Contract Law of the People’s Republic of China”, the “Regulation on Building and Installation Contracting Contract”, and other relevant national laws and regulations, as well as the specific nature of this project

3) 由C581引出10路10kV线路，分别为A507的四台变压器，B551的两台变压器，B553TDA装置氢气压缩机2台，C521盐酸装置氯气压缩机1台，盐酸压缩机1台提供电源。其中，变压器回路采用10kV截面为185mm2的三芯铠装电缆，马达回路采用10kV截面为95mm2的三芯铠装电缆。以上电缆线路均沿规划路径埋地敷设。10 10kV lines led from C581 are used to supply power to A507's four transformers, B551 two transformers, B553TDA 2 sets of hydrogen compressor unit, C521 hydrochloric acid chlorine gas compressor unit, and hydrochloric acid compressor unit respectively. Among them, transformer circuit uses x 3-core armored cable with 10kV cross-section 185mm2, motor circuit uses three-core armored cable with 10kV cross-section 95mm2. All cable lines will be laid underground along the planning path.

本工程中既含有大量的中厚板和厚板，又含有大量的成品H型钢、钢管，规格种类繁多，要在如此短的时间内采购这么大吨位量的材料，难度巨大。

本项目主要建筑均为钢结构（能源中心为混合结构）。厂房和库房的柱子采用H型钢，格构式钢柱，屋面结构采用桁架结构，屋面系统采用楼压型钢板加改性沥青防水卷材加270mm厚的硬质玻璃面保温带硅酸板加TPO的柔性防水卷材，墙面系统采用200mm的三明治墙面板。

本工程中，除采用大量的焊接连接外，还存在很多高强度螺栓连接形式，其节点强度和刚度是控制的重点，特别是高强螺栓连接质量和焊接质量，故该工程中高强螺栓的孔位精度要求相当高。

格力空调制冷中常用的英语与中文对照表，维修工作中可以做个参考。

某国外工程岗楼建筑和结构图纸。

本图纸为外资企业厂房电气中英文套图，图纸包含着毛织厂房电力平面圖 、维修车间,锅炉房电力平面图、毛织厂房照明平面图等，图纸内容完整，表达清晰，制图严谨，欢迎设计师下载使用。

本资料为：FIDIC国际合同条款中英文对照，可供网友参考。

内容简介 目前国内用于排水管道工程的管材有许多种，特别是近几年来随着新技术和新材料的发展，又出现了许多新管材，它们各有特点，各善胜场，运用在排水行业，均有不俗的业绩。